Ethylene bis-stearamide manufacturer and supplier with Sainuo? Sainuo is the leading polyethylene wax manufacturer and EBS wax supplier for PE wax, Ethylene bis-stearamide, etc. Polyethylene wax lubrication dispersant with an annual output of 30,000 tons, production scale of international production base, 60,000 tons of production and sales capacity. For quotation, TDS, samples request, please contact us. If there is anything you’re not sure about or you just need a hand getting set-up you can call or email us(polyethylene wax supplier). Discover additional information on ethylene bis-stearamide powder.
Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.
Dibenzoylmethane is a chemical substance, easily soluble in chlorohydrin and chloroform, soluble in sodium hydroxide solution, insoluble in sodium carbonate solution, and slightly soluble in water. As a co-stabilizer for calcium / zinc hydroxy acid salt stabilization systems, High transmittance, it can greatly improve the PVC initial coloring, transparency, long-term stability and processing in the precipitation and “zinc burning”.
Plastic additives can generally be divided into two categories. Namely: process additives and functional additives. The main function of the former is to help the smooth implementation of the processing process and improve the smoothness of process operation. Such additives include antioxidant, lubricant, coupling agent, release agent, etc; The latter can endow or improve the specific application performance of products. Representative additives include plasticizer, light stabilizer, UV absorber, antistatic agent, flame retardant, nucleating agent, antibacterial agent, etc.
The internal and external lubrication is insufficient, the melt viscosity is large, the plasticizing torque is large, and the melt wall sticking phenomenon is serious. There is a yellow decomposition line on the material surface, the surface smoothness is poor, and the mechanical properties of the product are reduced: the internal and external lubrication is excessive, the plasticizing torque is small, and the melt plasticization is obviously insufficient. Although the product has good smoothness, the pressure point adhesion is poor, which seriously affects the mechanical properties of the product.