Install Solar LED Street Lights
In order to install solar led street light, you must first dig a hole about 60 centimeters deep and a full one m3. The hole should be deep enough to fit the solar battery. Then you must attach the LED bulb into the holder. Before installing solar LED street lights, follow the installation instructions carefully. Make sure you follow safety guidelines and adhere to all the necessary measurements. Once you’re done, you can begin enjoying your new lights! Get more details outdoor street light factory
Once the LEDs are installed, you need to place the controller inside the lamp pole. It’s important that the wires and leads of the solar street light controller are properly connected. Next, you’ll need to attach the solar panel to the battery. Once the battery is connected, you’re ready to connect the LED light to the solar panel. And then, you’ll have to attach the battery to the LED.
Once you’ve installed the solar street light, you need to install the controller. Then, you’ll need to mount the LEDs on the pole. Once you’ve secured the controller, you’re ready to hang the lights. After you’ve installed the controller, you must install the LEDs. After you’ve mounted them, the next step is to attach the steel cables to the light’s base.
How to Install Solar LED Street Lights
Once you’ve installed the controller, you’ll need to mount the solar street light. It will be mounted on a pole that is flat, level, and free of inclination. Once you’ve secured the light to the pole, you’ll need to connect the wires to the battery and to the solar panel. This way, the lights will stay bright for years. You can also connect them to your controller.
First, you need to prepare the location where you want to install the solar street light. After determining where you’ll place the light, make sure it is level. After that, you need to install the pole. The pole should be level and flat, so it is important to place the pole at a level height. Once you’ve installed the pole, you can attach the LED light. The controller and battery should be connected to the controller.
After you’ve installed the solar street light, you need to install the controller. The controller will control the LED lights. The solar controller is the core component of a solar street light. The circuit controls the light’s brightness and its timing. In addition, the controller must be connected to a battery. You must connect the battery to the LED light and the controller. Ensure that the wiring is firmly attached to the pole.